All American Heating & Cooling : Air Conditioning 13 thru 18 SEER

Some frequently asked questions:

Why do I need to match my condensing unit and outdoor coil in a new system?
Imagine four old, worn-out tires on your car. You decide to replace only two of them. You can still drive your car, but you'll soon be disappointed with the inconsistent handling and the poor mileage you get. The unmatched tires simply aren't capable of the same level of performance. You could have these same kinds of problems with comfort and efficiency if the components of your central air conditioning or heat pump system are not properly matched. So if you install a new outdoor unit, be sure to include a new, equally efficient "matched" indoor unit.

What is a SEER rating?
Cooling efficiency for air conditioners and heat pumps is indicated by a SEER (Seasonal Energy Efficiency Ratio) rating, which tells you how efficiently a unit uses electricity. The higher the number, the greater the efficiency.
The typical SEER rating of units manufactured prior to 1992 is about 6.0. In 1992, the government established the minimum cooling efficiency standard for units installed in new homes at 10.0 SEER. High-efficiency units have a SEER of at least 13.0; the maximum available is about 18.

What's with all the noise in my yard?
Sometimes noise from condensing (outdoor) units interferes with your peace outdoors and even your quiet indoors. It's a factor you should at least look at when you're comparing different models.

The sound level of outdoor units is measured in bels (similar to decibels), on a scale from 0 (barely perceptible sound) to 13 (the threshold of pain). Most air conditioners and heat pumps operate at 8 to 9 bels; some units' ratings are as low as 6.8. That may not sound like a wide range, but consider this: 9 bels sounds 10 times louder than 8 bels. That means one 9-bel air conditioner is as loud as 10 units rated at 8 bels. Taking the time to compare bel ratings is pretty sound advice.

What are some other comfort considerations?
Some air conditioners and heat pumps offer additional features that provide greater comfort. Two-speed units can run on low speed (using 50% of the energy) up to 80% of the time, so they offer the same benefits as multi-capacity furnaces - fewer on/off cycles, fewer drafts and much smaller temperature swings. You also get better air circulation, for even, consistent cooling and/or heating throughout your home. Plus, if you purchase a multi-speed or variable-capacity furnace or fan coil with your unit, you will enhance both the comfort and the efficiency of your air conditioning or heat pump system even further.

Allegiance® 13 Air Conditioner

Key Benefits:

Surpasses government efficiency standards, helping you save up to 38% on your energy bills while reducing greenhouse gas emissions*

An economical option for efficient and reliable cooling

Rust-resistant coating, screws and basepan protect system from the elements

*Potential energy savings may vary depending on your lifestyle, system settings, equipment maintenance, local climate, home construction and installation of equipment and duct system.

1. Spine Fin™ coil is constructed of thousands of tiny spines bonded to continuous all-aluminum refrigerant tubing, which provides more surface area, adding greater heat transfer capabilities and more effectiveness over time.

2. Single-speed fan motor offers even quieter operation and conserves energy for greater efficiency.

3. Steel louvered panels are designed to protect the coil from leaves, hail and damaging elements.

4. Baked-on paint coating on the louvers won’t scratch and prevents rust and corrosion.

5. Durabase™ basepan is made from a durable composite material that won’t crack, warp, corrode or rust.

6. Easy-Sess™ service access panels protect all electrical and refrigerant controls with a side panel that can be quickly removed for installation or service.

7. Duration™ compressor is the heart of the system. With an oversized, heavy steel outer shell, an epoxy-sealed heavy duty motor, and a unique valve design, our compressors will stand up to the harshest elements for years to come.

8. SermaGuard™ rust resistant screws resist against rust and corrosion.

Not shown: Compressor sound insulators reduce noise for quieter operation. (Some models.)

Allegiance® 14 Air Conditioner

Key Benefits:

Surpasses government efficiency standards, helping you save up to 43% on your energy bills while reducing greenhouse gas emissions*

Provides more efficient and reliable cooling, thanks to its single-row Spine Fin™ coil and durable Duration™ compressor

Rust-resistant coating, screws and basepan protect system from the elements

*Potential energy savings may vary depending on your lifestyle, system settings, equipment maintenance, local climate, home construction and installation of equipment and duct system.

1. Spine Fin™ coil is constructed of thousands of tiny spines bonded to continuous all-aluminum refrigerant tubing, which provides more surface area, adding greater heat transfer capabilities and more effectiveness over time.

2. Single-speed fan motor offers even quieter operation and conserves energy for greater efficiency.

3. Steel louvered panels are designed to protect the coil from leaves, hail and damaging elements.

4. Baked-on paint coating on the louvers won’t scratch and prevents rust and corrosion.

5. Durabase™ basepan is made from a durable composite material that won’t crack, warp, corrode or rust.

6. Easy-Sess™ service access panels protect all electrical and refrigerant controls with a side panel that can be quickly removed for installation or service.

7. Duration™ compressor is the heart of the system. With an oversized, heavy steel outer shell, an epoxy-sealed heavy duty motor, and a unique valve design, our compressors will stand up to the harshest elements for years to come.

8. SermaGuard™ rust resistant screws resist against rust and corrosion.

Not shown: Compressor sound insulators reduce noise for quieter operation. (Some models.)

Allegiance® 15 Air Conditioner

Key Benefits:

Surpasses government efficiency standards, helping you save up to 47% on your energy bills while reducing greenhouse gas emissions*

Keeps operating noise to a minimum, even on the hottest days
Provides more efficient and reliable cooling, thanks to its single-row Spine Fin™ coil and durable Duration™ compressor

Rust-resistant coating, screws and basepan protect system from the elements

*Potential energy savings may vary depending on your lifestyle, system settings, equipment maintenance, local climate, home construction and installation of equipment and duct system.

1. Spine Fin™ coil is constructed of thousands of tiny spines bonded to continuous all-aluminum refrigerant tubing, which provides more surface area, adding greater heat transfer capabilities and more effectiveness over time.

2. Fan motor operates quietly so noise levels are kept to a minimum.

3. Steel louvered panels are designed to protect the coil from leaves, hail and damaging elements.

4. Baked-on paint coating on the louvers won’t scratch and prevents rust and corrosion

5. Durabase™ basepan is made from a durable composite material that won’t crack, warp, corrode or rust.

6. Easy-Sess™ service access panels protect all electrical and refrigerant controls with a side panel that can be quickly removed for installation or service.

7. Duration™ compressor is the heart of the system. With an oversized, heavy steel outer shell, an epoxy-sealed heavy duty motor, and a unique valve design, our compressors will stand up to the harshest elements for years to come.

8. SermaGuard™ rust resistant screws resist against rust and corrosion.

9. Compressor sound insulators reduce noise for quieter operation.

Allegiance® 16 Ultra Efficiency Air Conditioner

Key Benefits:

Surpasses government efficiency standards, helping you save up to 50% on your energy bills while reducing greenhouse gas emissions*

Contains a two-step Duration™ compressor with two-stage cooling which runs at 70% capacity most of the time, and steps up to the second stage on the hottest days*

So quiet, you barely notice it's running

Provides more efficient and reliable cooling, thanks to durable single-row Spine Fin™ coil
Rust-resistant coating, screws and basepan protect system from the elements

*Potential energy savings may vary depending on your lifestyle, system settings, equipment maintenance, local climate, home construction and installation of equipment and duct system.

1. Spine Fin™ coil is constructed of thousands of tiny spines bonded to continuous all-aluminum refrigerant tubing, which provides more surface area, adding greater heat transfer capabilities and more effectiveness over time.

2. Variable speed fan motor operates very quietly so noise levels are kept at a minimum. And, it conserves energy for lower cost operation.

3. Steel louvered panels are designed to protect the coil from leaves, hail and damaging elements.

4. Baked-on paint coating on the louvers won’t scratch and prevents rust and corrosion.

5. Durabase™ basepan is made from a durable composite material that won’t crack, warp, corrode or rust.

6. Easy-Sess™ service access panels protect all electrical and refrigerant controls with a side panel that can be quickly removed for installation or service.

7. Duration™ compressor is the heart of the system. With an oversized, heavy steel outer shell, an epoxy-sealed heavy duty motor, and a unique valve design, our compressors will stand up to the harshest elements for years to come.

8. SermaGuard™ rust resistant screws resist against rust and corrosion.

9. Compressor sound insulators reduce noise for quieter operation. (Some models.)

Allegiance® 18 Ultra Efficiency Air Conditioner

Key Benefits:

Significantly surpasses government efficiency standards, helping you save up to 56% on your energy bills while reducing greenhouse gas emissions*

Contains two compressors that provide two-stage cooling, running at an energy-saving 50% capacity most of the time, which may help lower your cooling bills*

Runs quietly and keeps temperature even from room to room with its variable speed fan motor

Removes unwanted humidity from the air, leaving you feeling cooler and more comfortable

Provides more efficient and reliable cooling, thanks to durable woven Spine Fin™ coil and dual Duration™ compressors

Rust-resistant coating, screws and basepan protect system from the elements

*Potential energy savings may vary depending on your lifestyle, system settings, equipment maintenance, local climate, home construction and installation of equipment and duct system.

1. Woven Spine Fin™ coil is the next generation of our innovative outdoor coil design. Its unique all-aluminum structure provides very low airflow resistance for more efficient heat transfer capabilities and superior efficiency levels in the Allegiance 18.

2. Variable speed fan motor operates very quietly so noise levels are kept at a minimum. And, it conserves energy for lower cost operation.

3. Steel louvered panels are designed to protect the coil from leaves, hail and damaging elements.

4. Baked-on paint coating on the louvers won’t scratch and prevents rust and corrosion.

5. Durabase™ basepan is made from a durable composite material that won’t crack, warp, corrode or rust.

6. Easy-Sess™ service access panels protect all electrical and refrigerant controls with a side panel that can be quickly removed for installation or service.

7. Dual Duration™ compressors provide two-stage cooling. The smaller compressor works to handle your daily comfort. On the hottest days the larger compressor takes over to provide you with the ultimate comfort experience in the Allegiance 18.

8. SermaGuard™ rust resistant screws resist against rust and corrosion.

9. Compressor sound insulators reduce noise for quieter operation (Some models).

24 Hour Service

708-403-8165
708-771-1894

For emergency service or a free
estimate on upgrading your existing system.